R02: Mid Semester Review

Last Updated on 2023.10.07 by slee

The requirements for this review have been developed in collaboration with the BIOS faculty team. My requirements may differ from the other studio sections because of the specifics of our project.

Minimum Submission Requirements:

The work will be reviewed in MMCH as noted on the studio calendar. Attendance is required for all reviews - one session to present and two sessions to critique.

I will provide a shared laptop for TV or projection. Please submit a record set of your submission as PDF's to: 48400C Files for Reviews

List of Presentation Materials

• Renders
• Experiential Drawings
• Ground Floor/ Site Plan, 1:480 (1"=40")
• Floor Plans including structural framing configuration, 1:192 (1/16"=1'-0")
• Primary Exterior Elevations, 1:192 (1/16"=1'-0")
• One (1) Primary Building Section, 1:96 (1/8"=1'-0")
• One (1) Enclosure Detail, 1:8 (1 1/2"=1'-0")
  (I recommend an intermediate floor-enclosure wall location)
• Passive and active conditioning strategy diagrams for heating, cooling, ventilating, water and power.
• Solar Budget Calculations
• Visualizations of your ClimateStudio analyses tied to specific energy and daylighting strategies.
  (Best shown in building section)
• Physical model to fit the shared site model
• Other models and drawings to (re)present your scheme

Plan your digital presentation on your team Miro board. Use frames, so that you can use the Miro presentation mode to present your scheme. After leaving presentation mode, your team will be able to pan to specific images for discussion with reviewers and classmates.

Mandates:

• Use a formatted 22 x 34 (ANSI D) layout with title block for each page of your presentation. Slee Layouts from ArchiCAD template
• Arrange plan drawings with the lowest floor plan at the bottom of the presentation and the highest floor plan at the top of the presentation. Plans need to be oriented parallel to the edges of the plot (not rotated to absolute north)
• All plan drawings (site plans, key plans, floor plans) must be oriented with north pointing upwards (toward the review room ceiling) and a conspicuous graphic north arrow.
• Numeric scales must be be noted as 1:192 or 1/16"=1'-0", etc.
• Graphic scales must be included.